Plasma etch cluster tool
Jälki-ilmoitus #62691- Hankinnan arvo
- 2 728 000 €
- Voittaja
- LAM Research
- Julkaistu
Hankinnan tiedot
- Ostaja
- TEKNOLOGIAN TUTKIMUSKESKUS VTT OY
- Ilmoituksen numero
- 62691
Hankinnan kuvaus
Plasma etch cluster tool The object of the procurement was an advanced plasma etch cluster tool to etch metal and thin film layers from 200 mm silicon wafers, as used in the Semiconductor industry. VTT expected a reliable production-worthy tool. The tool was required to have the capacity for at least four process chambers and other features, which are described below. DIRECT AWARD, Article 40 2(2) of Finnish Procurement act (1397/2016) The procurement was carried out as a direct award in accordance with 40 article Section 2(2) of the Finnish Public Procurement Act. According to the 40 § section 2(2) of the Act on Public Contracts (1397/2016), only a certain supplier can implement the procurement for a technical reason, or for a reason related to protecting an exclusive right; it shall be a further condition that there are no reasonable alternatives or substitute solutions, and that the absence of competition is not due to an artificial narrowing of the terms and conditions of the procurement. VTT acquired an advanced plasma etch cluster tool for the etching of metal, dielectric and other thin-film layers on 200 mm semiconductor wafers. The equipment was intended to support a broad range of research, development and pilot-line processes, including metal and high-k material etching. A single cluster platform was required to provide production-level process reliability, uniformity and reproducibility while retaining the process flexibility required in a research and technology organisation. The tool configuration was based on the technical needs arising from the intended use. The mandatory capabilities included: (i) advanced chamber cleaning and conditioning, comprising waferless cleaning between process wafers and cleaning or passivation with cover wafers for materials that form less volatile by-products; (ii) a wide process-power range and etch-rate tunability through atomic layer etching (ALE), low-voltage pulsed-bias etching and steady-state processing; (iii) dual-zone chuck heating and dual-zone coil or power control for optimisation of within-wafer etch uniformity; and (iv) at least three load ports and a cluster architecture capable of supporting at least four process chambers. These capabilities were required to control crosscontamination, stabilise sensitive processes, process materials with different volatility and thickness characteristics, and avoid the cluster becoming a capacity bottleneck as additional process chambers were introduced. VTT conducted a market survey to identify suppliers of advanced etch cluster systems for semiconductor processing. The survey included direct discussions with tool manufacturers, technical evaluation of available solutions and a review of publicly available product information. Based on the market survey, LAM Research was the only identified supplier whose solution met all mandatory technical requirements simultaneously. In particular, the LAM 2300 platform with Kiyo 45 and MW strip chambers provi…
Voittajat ja hankinnan osat
Plasma etch cluster tool
- LAM Research (1363305-U)
The object of the procurement was an advanced plasma etch cluster tool to etch metal and thin film layers from 200 mm silicon wafers, as used in the Semiconductor industry. VTT expected a reliable production-worthy tool. The tool was required to have the capacity for at least four process chambers and other features, which are described below. DIRECT AWARD, Article 40 2(2) of Finnish Procurement act (1397/2016) The procurement was carried out as a direct award in accordance with 40 article Sec…
Lähde: HILMA-jälki-ilmoitus 62691. Alkuperäinen ilmoitus (avautuu uuteen välilehteen)